Remote Control
Turn On Menu Key Priority-Press 18
TURN ON MENU KEY PRIORITY-PRESS
The Menu class keys are MENU, SELECT, GUIDE, INFO, EXIT and Navigation arrows.
To setup and turn on menu class key to various devices perform the following steps:
Menu Key Priority-Press Setup
1. Press device key (TV, VCR, CBL/SAT or DVD). The red light blinks one time.
2. Press P key. The red light blinks two times.
3. Press Menu Class Keys. The red light blinks three times.
When a Menu Class key is pressed, the menu will only work for the selected
device.
PUNCH-THROUGH VS PRIORITY PRESS
Punch-Through and Priority-Press are mutually exclusive features. If Priority-Press is
turned on, Punch-Through is turned off. If Priority-Press is turned off, Punch-Through is
turned on.
Note: If you enable priority-press with no class key priorities programmed the remote does not sent
either Punch-Through or Priority-Press command.
TOGGLE PUNCH-THROUGH AND PRIORITY-PRESS
To toggle between Punch-Through and Priority-Press perform the following steps:
1. Press any device key (TV, VCR, CBL/SAT or DVD). The red light will blink
one time.
2. Continue to press and hold the device key for 3.5 seconds.
• If the red light blinks three times, Punch-Through is OFF and Priority-
Press is ON.
• If the red light blinks two times, Punch-Through is ON and Priority-Press
is OFF.
To Next Page
Loading...
