20
1. Hold down
CALL until the Direct
Call ID number flashes on the
display. Press
e
or
d
to select the
receiver’s home ID number or
Group option. (If you select
receiver’s Home ID number 1 –16,
youcanonlysendapagetoone
user or several users with the
same ID home number.) If you
select
Õ
, you can send a page to
all users.
2. Press
PTT to store the setting.
CALL MELODY
When you press CALL to send out the direct call data, a melody
specific to the ID number sounds. Likewise, at the receiver side,
a melody specific to the ID sounds as it receives the direct call
data. See the following table for the melody and corresponding
IDs.
Call Melody
No. ID
1 2 3 4 5
For
Transmitter
Call ID =
Group
Call
Call ID =
1~4
Call ID =
5~8
Call ID =
9~12
Call ID =
13~16
To Next Page
Loading...
