Radio Shack 43-327 - Handset Ringer Volume; Telephone Base Ringer Volume; Ringer Tone; Key Tone

12
Telephone Setup
Handset Ringer Volume
You can set the ringer volume or turn the ringer off.
1. Press MENU/SELECT to show the menu.
2. Press  or  to select >RINGER VOLUME, then press
MENU/SELECT.
3. Press  or  to adjust the volume. A sample of
each ringer volume plays as you scroll through the
choices.
4. Press MENU/SELECT to confirm your selection.
n Note: Setting the volume to the lowest level turns off the ringer. The
ringer off icon ( ) appears.
Telephone Base Ringer Volume
Press VOL  or VOL  on the telephone base to adjust the ringer volume
when the telephone is not in use. When you set the ringer volume to zero,
the base ringer is off and the system announces, “Base ringer is off.”
Ringer Tone
You can choose from different ringer tones.
1. Press MENU/SELECT to show the menu.
2. Press  or  to select >RINGER TONE, then press
MENU/SELECT.
3. Press  or  to select the desired ringer tone.
A sample of each ringer tone plays as you scroll
through the choices.
4. Press MENU/SELECT to confirm your selection.
If you turn off the ringer volume, you will not hear ringer
tone samples.
Key Tone
You can turn the key tone on or off.
1. Press MENU/SELECT to show the menu.
2. Press  or  to select >KEY TONE, then press
MENU/SELECT.
3. Press  or  to choose ON or OFF.
4. Press MENU/SELECT to confirm your selection.
>RINGER VOLUME
RINGER TONE
>RINGER VOLUME
RINGER TONE
RINGER VOLUME RINGER VOLUME
>RINGER TONE
KEY TONE
>RINGER TONE
KEY TONE
RINGER TONE
1
RINGER TONE
1
>KEY TONE
LCD LANGUAGE
>KEY TONE
LCD LANGUAGE
KEY TONE
ON
KEY TONE
ON