The Integrated Answering Device
62
Skipping a message
1. Press XPLAY/STOP to review your
messages. The number of stored
messages is announced.
2. Press
SKIP/SELECT at anytime to
skip to the next message.
Each time
SKIP/SELECT is pressed,
the system scans forward one
message. If you have several
messages, press
SKIP/SELECT
repeatedly to find the message you
want to play.
To quickly scroll through a message,
press and hold
SKIP/SELECT. The
system advances through the playback
at double speed.
3. Press
XPLAY/STOP at anytime to
stop reviewing your messages and
return to standby.
The message counter shows the
number of messages stored in memory.
Deleting a message
To maintain maximum record time, delete
the old messages. Ô
1. Press
XPLAY/STOP to review your
messages.
2. Press
∅DELETE at anytime during the
message to delete the message. You
hear a confirmation tone and the
message is deleted.
3. To delete all messages, press
∅DELETE in standby mode. Press
∅DELETE again after the
announcement “To delete all
messages, press delete again.”
!
Ô NOTE Ô
When the answering
system is full, appears
on the base. You should
delete some messages so
that the system can record
new messages.
!
IMPORTANT
!
When you press ∅DELETE,
you are permanently
deleting the message. Once
deleted, the message
cannot be replayed or
retrieved.
To Next Page
Loading...
