To Next PageTo Next PageHow to fix CHARGE LED not working on Radio Shack Cordless Telephone?
If the CHARGE LED on your Radio Shack Cordless Telephone doesn't light up when the handset is in the cradle, ensure the AC adapter is correctly plugged into both the base (or charger) and the wall outlet. Also, ensure the handset is properly seated in the cradle and that the charging contacts are clean.
Why can't I make or receive calls on my Radio Shack 5.8 GHz Multi-Handset Expandable with Digital Answerer Cordless Telephone?
If you are unable to make or receive calls on your Radio Shack Cordless Telephone, verify that both ends of the base telephone line cord are securely plugged in. Also, confirm that the AC adapter is plugged into the base and the wall outlet. If the issue persists, try disconnecting the AC adapter for a few minutes before reconnecting it. Ensure that you are not too far from the base and the line is not in use. Remember that if an outside call is already in progress, you cannot initiate another one.
What to do if Radio Shack Cordless Telephone handset doesn't ring?
If the handset of your Radio Shack Cordless Telephone doesn’t ring or receive a page, try the following: * Charge the batteries in the handset for 15-20 hours by placing the handset on the base or charging cradle. * Make sure that the handset is not too far from the base. * Place the base unit away from appliances or metal objects. * Make sure you are using the correct dialing mode.
How to reduce noise interference on Radio Shack Cordless Telephone?
If you experience severe noise interference with your Radio Shack Cordless Telephone, keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. Alternatively, move to another location or turn off the source of interference.
Why does my Radio Shack 5.8 GHz Multi-Handset Expandable with Digital Answerer Cordless Telephone audio sound weak?
If the audio sounds weak on your Radio Shack Cordless Telephone, try moving the handset and/or base to a different location away from metal objects or appliances. Also, make sure that you are not too far from the base.
What does 'Unavailable' mean on Radio Shack Cordless Telephone?
If 'Unavailable' appears in the display of your Radio Shack Cordless Telephone, ensure that another handset or the base is not currently in use. Also, make sure that you are not too far from the base.
Why is Caller ID not showing on my Radio Shack 5.8 GHz Multi-Handset Expandable with Digital Answerer?
If the Caller ID does not display on your Radio Shack Cordless Telephone, it might be because the handset was picked up before the second ring, or the call was placed through a switchboard.
Why doesn't my Radio Shack 5.8 GHz Multi-Handset Expandable with Digital Answerer Cordless Telephone communicate with other handsets?
If the handsets of your Radio Shack Cordless Telephone don’t communicate with each other, ensure that you have registered all handsets.
Why can't handset join conversation on Radio Shack 5.8 GHz Multi-Handset Expandable with Digital Answerer Cordless Telephone?
If the handset or the base of your Radio Shack Cordless Telephone can’t join the conversation, ensure that there are not two handsets already using the three-way conference feature and that another handset or base is not in privacy mode.
Why is Room Monitor not working on Radio Shack Cordless Telephone?
If the Room Monitor feature does not work on your Radio Shack Cordless Telephone, ensure both handsets (or the handset and the base) are set to Room Monitor mode and are turned on. Also, make sure to place the handsets within the range of the base.
General| Frequency | 5.8 GHz |
|---|---|
| Type | Cordless Telephone |
| Answering System | Digital Answerer |
| Expandable Handsets | Yes |
| Handset Expandability | Expandable |
Details compliance with FCC rules and ACTA requirements.
Explains built-in circuits to protect against line and power surges.
Guidelines for placing the phone base for optimal performance.
Steps for connecting and charging the rechargeable battery pack.
Examples of handset screen animations and their meanings.
Lists factory default settings for various phone functions.
Tips for navigating the phone's software interface and menus.
Using two handsets as two-way radios without the base.
Recording a custom greeting message for the answering system.
Setting a two-digit code for remote access to messages.
Configuring Caller ID display during Call Waiting.
Instructions for making calls from the handset, speakerphone, and base.
How to answer incoming calls on the handset or base.
Putting an active call on hold for up to five minutes.
Adjusting the ringtone volume for incoming calls.
Entering and saving contact information, ring tones, and speed dial numbers.
Searching and displaying stored contact information.
Displaying caller information during incoming calls and Call Waiting.
Accessing and reviewing the list of incoming calls.
Procedure for registering new handsets to the base unit.
Using the intercom and transferring calls between units.
List of capabilities of the digital answering system.
Instructions for playing, repeating, and deleting messages.
Operating the answering system remotely via touch-tone phone.
