Radio Shack 5.8 GHz Multi-Handset Expandable Cordless Telephone with Digital Answerer - Room Monitor; Using Room Monitor

Setting Menu Options
18
2. Press the ENTER soft key to enter
DirectLink mode. You will hear a
confirmation tone, and
DirectLink
Mode Complete
appears.
3. To return to normal mode, press the
CANCEL soft key and then the OK soft
key, or return the handset to the cradle.
Room Monitor
This feature allows you to monitor sounds in
another room. Place the base or a handset
in the room you wish to monitor; it will
function as a microphone. A second
handset (or the base) can be set to function
as a remote speaker, allowing you to
monitor sounds in the room. Ô
Using Room Monitor
1. Press the MENU soft key and select the
Room Monitor menu.
To Room
Monitor
appears.
2. Select the handset or base you want to
monitor by using
VOL/RING/ or VOL/
RING/
.
3. Press the
OK soft key.
RoomMonitor
appears, and you hear
sounds in the room where the handset
or the base is installed.
4. To turn off the Room Monitor, press the
END soft key, or END.
Handset Setup/Base Setup
The following submenu options must be set
separately for each handset and the base.
Selecting a Ringer Tone (Handset
Only)
Ringer Tone lets you choose from ten ringer
tones or ten melodies:
Ô NOTE Ô
This feature only works
when the handset(s) is
within the range of the
base.