The Integrated Answering Device
59
Announce only feature
The announce only feature plays a pre-
recorded outgoing message or your own
personal outgoing message, but it will not
allow the caller to leave a message. To set
announce only, follow the steps on “Setting
the Record Time” on page 25. If you want to
use your own greeting and you want to
change your greeting to omit the prompt to
leave a message, refer to “Selecting Your
Greeting (Base only)” on page 23.
The following message is pre-recorded:
“Hello, no one is available to take your call.
Please call again.”
USING THE ANSWERING
SETUP MENU
The Answering Setup menu allows you to
set the following Answering System
functions through the handset or the base.
For detailed instructions, see “Setting Menu
Options”, “Answering System Setup” on
page 23.
NEW MESSAGE LED
The new message LED on the handset is
designed to work with your answering
system. The LED flashes when you have
new messages in your answering system.
The LED stops flashing when all new
messages are played back.
Menu Options Base Handset
Record Greeting
X
Select Greeting X
Security Code
Ring Time
Record Time
Message Alert
Language
Call Screen
To Next Page
Loading...
