To Next PageTo Next PageWhy is answering system not working on Radio Shack Cordless Telephone?
If the answering system on your Radio Shack Cordless Telephone does not work, ensure the base unit is plugged in and that the answering system is turned on.
Why are messages incomplete on Radio Shack Cordless Telephone?
If messages recorded on your Radio Shack Cordless Telephone are incomplete, the incoming messages may be too long, so remind callers to leave a brief message. Alternatively, the memory may be full, so delete some or all of the saved messages.
What to do if outgoing message is deleted on Radio Shack 5.8 GHz Multi-Handset Expandable with Digital Answerer?
After a power failure, if the outgoing message is deleted on your Radio Shack Cordless Telephone, record your greeting again. The default message should remain.
Why is there no sound on Radio Shack 5.8 GHz Multi-Handset Expandable with Digital Answerer Cordless Telephone during call monitoring?
If there is no sound on the base unit speaker during call monitoring or message playback on your Radio Shack Cordless Telephone, adjust the speaker volume on the base unit and make sure the call screen feature is set to On.
Cannot access remote call-in features on Radio Shack 5.8 GHz Multi-Handset Expandable with Digital Answerer Cordless Telephone?
If you cannot access remote call-in features from another touch-tone phone on your Radio Shack Cordless Telephone, ensure you are using the correct PIN number. Also, make sure that the touch-tone phone you're using can transmit the tone for at least two seconds. If it cannot, you may have to use another phone to access your phone.
General| Frequency | 5.8 GHz |
|---|---|
| Type | Cordless Telephone |
| Answering System | Digital Answerer |
| Expandable Handsets | Yes |
| Handset Expandability | Expandable |
Details compliance with FCC rules and ACTA requirements.
Explains built-in circuits to protect against line and power surges.
Guidelines for placing the phone base for optimal performance.
Steps for connecting and charging the rechargeable battery pack.
Examples of handset screen animations and their meanings.
Lists factory default settings for various phone functions.
Tips for navigating the phone's software interface and menus.
Using two handsets as two-way radios without the base.
Recording a custom greeting message for the answering system.
Setting a two-digit code for remote access to messages.
Configuring Caller ID display during Call Waiting.
Instructions for making calls from the handset, speakerphone, and base.
How to answer incoming calls on the handset or base.
Putting an active call on hold for up to five minutes.
Adjusting the ringtone volume for incoming calls.
Entering and saving contact information, ring tones, and speed dial numbers.
Searching and displaying stored contact information.
Displaying caller information during incoming calls and Call Waiting.
Accessing and reviewing the list of incoming calls.
Procedure for registering new handsets to the base unit.
Using the intercom and transferring calls between units.
List of capabilities of the digital answering system.
Instructions for playing, repeating, and deleting messages.
Operating the answering system remotely via touch-tone phone.
