Radio Shack Big Button Phone - Initial Setup and Connection; Connecting the Handset; Phone Configuration

5
4. Plug the cord’s other end into the wall plate jack, then
align the base’s keyhole slots with the wall plate studs
and slide the phone downward to secure it.
To mount the phone directly on a wall, in addition to the
preceding steps, you need two screws (not supplied) with
heads that fit into the keyhole slot on the bottom of the base.
1. Drill two holes 83mm apart (vertically). Then thread a
screw into each hole, letting the heads extend about
5mm from the wall.
2. Substitute the long modular cord for the short cord.
%100'% 6+0 ) "6*'"*#0&5'6
Plug one end of the supplied coiled cord into the handset’s
modular jack. Then connect it to the jack on the left side of
the telephone base.
±
5'66+0)"72"6*'"2*10'
1. Press and hold both
UP
and
DOWN
for about four
seconds until
;DJ;HýB7D=K7=;
;DJ;HýB7D=K7=;;DJ;HýB7D=K7=;
;DJ;HýB7D=K7=;
displays, then
;D=ý ;IFý<H7
;D=ý ;IFý<H7;D=ý ;IFý<H7
;D=ý ;IFý<H7
appear.
;D=
;D=;D=
;D=
flashes.
2. Press
UP
or
DOWN
to select the desired language,
press
DELETE
to confirm.
B9:ý9EDJH7IJ
B9:ý9EDJH7IJB9:ý9EDJH7IJ
B9:ý9EDJH7IJ
,
'
''
'
,
(
((
(
,
)
))
)
,
*
**
*
and
+
++
+
are displayed.
)
))
)
flashes.
3. Press
UP
or
DOWN
to select the contrast level (from
'
''
'
–
+
++
+
), press
DELETE
to confirm.
;DJ;Hý7H;7ý9E:;
;DJ;Hý7H;7ý9E:;;DJ;Hý7H;7ý9E:;
;DJ;Hý7H;7ý9E:;
,
and
UýUýU
UýUýUUýUýU
UýUýU
appears. The first
U
UU
U
flashes.
Keyhole Slots
Mounting Bracket
Wall Plate Studs
±
"016'"
±
"
Your local RadioShack store sells a
variety of longer coiled handset
cords, which are especially useful
when you mount the phone on a
wall.