Radio Shack CCR-81 Operation Manual

Operation Manual
Computer Graphics
-----------TRS-BO ® ----------
Hints and Tips about PUT:
An Illegal Function Call error will result if you
attempt to PUT a rectangular pixel area to a section of
the screen which is totally or partially beyond the
parameters of the screen. For example:
GET(5~,5~)-(15~,15~),V
PUT(2~~,2~~),V,PSET
returns an error because the rectangular pixel area
cannot be physically moved to the specified rectangular
pixel area (i.e., (2~~,2~~)-(3~~,3~~».
If you use PUT with a viewport (see VIEW), all
coordinates must be within the parameters of the
viewport or you'll get an Illegal Function Call error.
Examples
PUT with PSET
l~ DIM V% (63 )
15 SCREEN ~
2~ CIRCLE (3~,3~),1~
3~ GET (1~,1~)-(4~,4~),V%
4~ FOR I=l TO 5~~: NEXT I
5~ CLR
6~ PUT (ll~,ll~),V%,PSET
7~ FOR I=l TO 5~~: NEXT I
In this example, the circle is drawn, stored, moved and re-created.
First the white-bordered circle appears in the upper left corner of
the screen (position (3~,3~) -- program line 2~). After a couple
of seconds (because of the delay loop), it disappears and then
reappears on the screen -- (ll~,ll~) program line 6~.
What specifically happened is:
1. An array was created (line l~).
2. A circle was drawn (line 2~).
3. GET -- The circle which was within the source
rectangular pixel area, as specified in the GET
---------lIadlOlllaell---------
-51-

Radio Shack CCR-81 Specifications

General

Brand	Radio Shack
Model	CCR-81
Category	Desktop
Language	English