25Troubleshooting
No sound when receiving
and playing MIDI data.
MIDI cables are not con-
nected properly.
Check the connection.
Bass notes in General
MIDI data are sent out
one octave lower.
Tone map parameter is set
to
N
.
Set the tone map parameter to
G
(see “Changing MIDI Set-
tings” on Page 22).
Sounds sent to another
MIDI device by the key-
board do not sound cor-
rect.
The other device’s MIDI
THRU function is turned
on.
Turn off the MIDI THRU func-
tion on the other device.
Trouble Possible Cause Remedy
42-4042.fm Page 25 Friday, April 28, 2000 11:18 AM
To Next Page
Loading...