How to fix low sensitivity between 25.000 and 39.995 MHz on Radio Shack Scanner?
To address low sensitivity between 25.000 and 39.995 MHz, consider replacing the switching circuit 037 or the bandpass filter (BPF), along with their associated circuits.
How to fix low sensitivity between 40.000 and 67.995 MHz on Radio Shack Scanner?
To fix low sensitivity between 40.000 and 67.995 MHz, you may need to replace the switching circuit 037 or the bandpass filter (BPF) and their associated circuits.
What to do if Radio Shack Scanner operates in manual but does not operate in scan?
If your Radio Shack Scanner works in manual mode but not in scan mode, try turning the squelch control clockwise.
General| Brand | Radio Shack |
|---|---|
| Model | Pro-2035 |
| Category | Radio |
| Language | English |
Lists features like Hyperscan, Weather Band Key, Channel Banks, Monitor Memory, Priority, Auto Store, Tape Out, Rotary Tuner, Delay, Memory Backup, Lock-Out.
Covers Direct Frequency Search, Sound Squelch, Backlit Display, and Two Power Options for scanner operation.
Instructions for installing the supplied telescoping antenna and guidelines for using an optional outdoor base antenna.
Guide to plugging the scanner's AC power cord into a standard outlet, including safety notes.
Instructions for powering the scanner using a vehicle's cigarette lighter socket with an optional DC cable.
Explains the purpose of each button and key on the scanner's control panel for operation.
Describes the meaning of various indicators, symbols, and text displayed on the scanner screen during operation.
Steps to turn on the scanner and adjust Volume and Squelch for optimal reception.
How to initiate channel scanning through active, non-locked channels in enabled banks.
Step-by-step guide to manually entering and storing a known frequency into a specific channel.
Process for the scanner to automatically find and store active frequencies into specified banks.
How to define and store frequency ranges for limit searches to find active transmissions.
Search up or down from a specific frequency, storing heard transmissions into monitor memories.
Program a specific channel to be checked every 2 seconds during scanning for important calls.
Offers solutions for common scanner problems like not scanning, poor reception, or unresponsive controls.
Lists the scanner's frequency ranges, band modes, step settings, and total channel storage.
To Next Page
