What to do if my Radio Shack PRO-2050 will not track a trunked system?
If your Radio Shack Scanner isn't tracking a trunked system, it could be because the transmission might not use a system that your scanner can track. In this case, try scanning another transmission.
General| Modulation Modes | AM, FM, WFM |
|---|---|
| Channels | 200 |
| Banks | 10 |
| Scan Rate | 50 channels per second |
| Priority Channels | 1 |
| Display | LCD |
| Step Size | 5 kHz, 12.5 kHz, 25 kHz |
| Antenna | Telescoping |
Explains how the PRO-2050 tracks Motorola Type I, Type II, and hybrid analog trunking systems.
Details 300-channel storage in 10 banks and 5 scan lists for organizing IDs.
Steps for powering on, setting squelch, and storing frequencies into channels.
Explains the differences between Type I, Type II, and hybrid trunking systems.
Guides on setting the scanner mode, squelch, and programming trunked frequencies.
Covers monitoring active IDs, locking out/unlocking IDs, and using scan delay.
Instructions for creating and using scan lists to organize trunked system IDs.
Details on scanning Type I/hybrid systems using fleet maps.
Lists typical problems like no scan, inoperativeness, poor reception, and error messages.
To Next Page
