31
Trunking Operations
Subfl eet information is included with the frequency list for a Type
I system. There are 16 preset fl eet maps to choose from, and it is
best to start with these when setting up a Type I or hybrid trunk
scanning bank.
preset fl eet maps
1
. Set the scanner for conventional scanning and press E/PGM,
then press TRUNK to select the trunking programming mode
and the bank you want to change.
2. Repeatedly press or to select TYPE 1 SYSTEM (E1), then
press E/PGM.
3. Repeatedly press or to select FLEEt, then press E/PGM.
4. Repeatedly press or to select the name of the desired map
(example E1P7).
E1P1 Block Code 0 1 234567
Size S11 S11 S11 S11 S11 S11 S11 S11
E1P2 Block Code 0 1 234567
Size S4 S4 S4 S4 S4 S4 S4 S4
E1P3 Block Code 0 1 234567
Size S4 S4 S4 S4 S4 S4 S12 (S12)
E1P4 Block Code 0 1 234567
Size S12 (S12) S4 S4 S4 S4 S4 S4
E1P5 Block Code 0 1 234567
Size S4 S4 S12 (S12) S4 S4 S4 S4
E1P6 Block Code 0 1 234567
Size S3 S10 S4 S4 S12 (S12) S12 (S12)
E1P7 Block Code 0 1 234567
Size S10 S10 S11 S4 S4 S4 S4 S4
E1P8 Block Code 0 1 234567
Size S1 S1 S2 S2 S3 S3 S4 S4
E1P9 Block Code 0 1 234567
Size S4 S4 S0 S0 S0 S0 S0 S0
To Next Page
Loading...
