32
Trunking Operations
E1P10 Block Code 0 1 234567
Size S0 S0 S0 S0 S0 S0 S4 S4
E1P11 Block Code 0 1 234567
Size S4 S0 S0 S0 S0 S0 S0 S0
E1P12 Block Code 0 1 234567
Size S0 S0 S0 S0 S0 S0 S0 S4
E1P13 Block Code 0 1 234567
Size S3 S3 S11 S4 S4 S0 S0 S0
E1P14 Block Code 0 1 234567
Size S4 S3 S10 S4 S4 S4 S12 (S12)
E1P15 Block Code 0 1 234567
Size S4 S4 S4 S11 S11 S0 S12 (S12)
E1P16 Block Code 0 1 234567
Size S3 S10 S10 S11 S0 S0 S12 (S12)
5. Press E/PGM . The scanner return to the previous screen
(FLEEt).
When the scanner searches for transmissions, you see
Type I fl eet and subfl eet IDs such as 100-12, 100-9, 000-12,
or 400-8.
programming a fl eet map
If no preset fl eet maps let you follow complete conversations, then
you can program a fl eet map.
1. Select the trunking programming mode and the bank you want
to change.
2. Press or to select Type 1 System (E1), then press E/PGM.
3. Press or to select FLEEt, then press E/PGM. A
preprogrammed fl eet map appears.
4. Press or until USr appears. Then press E/PGM.
5. Press or to select the size code for the fi rst block, then press
E/PGM. The next available block appears. If you select size
NOTE
To Next Page
Loading...
