Radio Shack RF Modulator - Connections; Connect 75-ohm Coaxial Cables

7
3. Connect the 75-ohm coaxial cables to the RF Modu-
lator following these guidelines:
• If your TV is already connected to another VHF
input source (such as cable TV, VCR, etc.):
a. Disconnect the input source’s 75-ohm cable from
the TV’s 75-ohm VHF input terminal, and recon-
nect it to the RF Modulator’s
ANT IN
terminal.
b.Then add a 75-ohm coaxial cable connected
between the
TO TV
terminal on the RF Modula-
tor and 75-ohm VHF input terminal on your TV.
CATV
Ant In To TV
75 Ohm 300 Ohms
VHF
Disconnect
from here
RF Modulator TV
CATV
Ant In To TV
75 Ohm 300 Ohms
VHF
Reconnect
here
Add this
cable
RF Modulator TV
15-1283.fm Page 7 Thursday, July 15, 1999 2:19 PM