12
SETTING THE
SPEAKERPHONES’
STATION EXTENSION
NUMBERS
When you connect more than one
Speakerphone, you must also set a dif-
ferent extension number for each station
so you can use the paging and intercom
features.
At each Speakerphone station:
1. Press
PROGRAM
.
MEMORY
ap-
pears.
2. Press ,
then
#
.
3. Enter the extension number (
11-22
)
you want to assign to that station.
4. Press
INTERCOM
to store the num-
ber. The speakerphone rings once.
Note:
If you try to set up a Speaker-
phone with an extension number that
has already been used for another sta-
tion, the speakerphone rings and dis-
plays
EXT
00
until you select an
available extension number.
SETTING THE DIALING
MODE
Follow these steps to set the phone for
the type of service you have — tone or
pulse.
1. Press
PROGRAM
.
MEMORY
ap-
pears.
2. Press ,
#
, then again.
3. Press
0
if you have tone service or
1
if you have pulse service.
4. Press
PRIVACY
to store the setting.
The phone rings once.
43-461.fm Page 12 Friday, August 13, 1999 8:52 AM
To Next Page
Loading...
