Radio Shack Telephone Interface II System Manual

Preparing
Your TRSDOS
Application
Programs
Many
Radio
Shack application
programs use TRSDOS instead of
TRSDOS-II. You can
use
TRSDOS
programs in two ways:
•
Operate
under
floppy
diskette control (see
Chapter
7).
•
Use
the
FCOPY
command
to convert
them
to the TRSDOS-II
format
and
copy them to
your hard
disk,
(Instructions are in
the insert supplied with the
TRSDOS-li
Reference
Manual.)
After converting your programs, you
can
load
them
under
TRSDOS-II, as instructed in Chapter 2.
Copying
TRSDOS-II
Programs
onto a
Hard
Disk
TRSDOS-II
programs use
TRSDOS-II
as
their
operating
system. If
you have one of these programs, you
can
use
it in
two
ways;
•
Operate under floppy diskette
control
(see
Chapter
8).
•
Use
the
MOVE
command
to copy the program from floppy
diskette
to
hard disk.
(See
the
TRSDOS-li
Reference Manual.)
Creating
a
Backup
Library
Through
operator
error,
power
failure, or other accidents, you can
lose
information
stored
on hard
disk. To prevent the
loss
of
a
days,
weeks, or even months work,
keep up-to-date copies of all
the files that are on your hard disk.
Instructions
are
in
your
TRSDOS-II Reference Manual (see SAVE
and RESTORE)
and
Appendix C
of
this
manual.
Running
TRSDOS-II
Programs
Under
Hard
Disk
Control
To ru n
TRSD
OS-II
programs
under
hard disk control, do not press
(RPD
[BREAK) after powering up
your
system. Otherwise, power up
as instructed in Chapter 3.
If
you
have
not
yet
copied
your
application programs to hard disk,
insert the floppy diskette with
the
program
in Drive 0. Then run the
program
by
entering
the
name
of the program.
For
example:
If the programs name is
SCRIPSIT
:
type;
SCRIPSIT
CENTER)
26

Radio Shack Telephone Interface II Specifications

General

Brand	Radio Shack
Model	Telephone Interface II
Category	Desktop
Language	English