Radio Shack Telephone Interface II Operation Manual

Computer Graphics Operation Manual
-----------TRS·BO ® ----------
PUT
Puts Rectangular Pixel Area from Array onto Screen
Important Note: BASICG recognizes two syntaxes of the
command PUT -- the syntax described in this manual and the
syntax described in the Model III Operation and BASIC
Language Reference Manual. BASIC recognizes only the PUT
syntax described in the Model III Operation and BASIC
Language Reference Manual.
The PUT function puts a rectangular pixel area stored in an
array, and defined by GET, onto the screen. GET and PUT work
---------ltadlOlllaell---------
-46-

Radio Shack Telephone Interface II Specifications

General

Brand	Radio Shack
Model	Telephone Interface II
Category	Desktop
Language	English