20
REPLACING THE FUSES
The TRC-446's 2-amp fuses help pro-
tect your CB from power surges and
short circuits.
•
If the red wire's fuse is blown
,
replace it with a 2-amp, fast-acting
glass fuse, such as Cat. No. 270-
1007.
•
If the orange wire's fuse is blown
,
replace it with a 1-amp, fast-acting
glass fuse, such as Cat. No. 270-
1005.
Follow these steps to replace each fuse.
1. Make sure the power source and CB
are both off.
2. To open the fuse holder, push the
fuse holder ends together, then turn
either end counterclockwise and
release it.
3. If the fuse is blown, replace it.
Caution:
Do not use a fuse with rat-
ings other than those specified here.
Doing so might damage your TRC-
446.
4. Close the fuse holder by pushing the
fuse holder ends together, then turn
either end clockwise.
21-1574.fm Page 20 Thursday, May 13, 1999 4:03 PM
To Next Page
Loading...
Need help?
General
