13
Follow these steps to use the PA ampli-
fier.
1. Turn on the transceiver. Then set
PA/MON/CB
to
PA
.
PA
appears on
the display.
2. To transmit, press
PUSH TO TALK
on
the microphone. Hold the micro-
phone 2–3 inches from your mouth
and speak in a normal tone of voice.
3. Turn
VOLUME
for the desired vol-
ume level. If you hear a high-pitched
squeal, turn
VOLUME
counterclock-
wise until the squeal stops.
Note:
To avoid acoustic feedback,
the speaker should be at least 6 feet
from the CB. If you experience feed-
back, avoid keying the microphone
until you have moved the speaker
away from the CB.
4. To turn off the PA amplifier, turn the
transceiver off. Or, set
PA/MON/CB
to
CB
for CB communication.
USING THE MONITOR
FEATURE
You can use your CB as a receiver to
listen to transmissions on an optional PA
speaker. With an optional PA speaker
connected, set
PA/MON/CB
to
MON
.
When
PA/MON/CB
is set to
MON
, your
CB cannot transmit and you hear sound
only from the external PA speaker.
21-1704.fm Page 13 Thursday, August 5, 1999 1:20 PM
To Next Page
Loading...
