TRS-SO
MODEL III
Symptom
Possible Cause. Cure.
Can't
get a cassette programto
1. Impropercassette connection.
load.
Checkconnection instructions in
cassette owner's manual.
2. Cassette load speed does not match
the speed
of
the recorded tape. Model I
Level II
BASIC programs are always
Low
(500 baud). Model III programs
may be eitherHigh
(1500) orLow.
3. Incorrect volume setting. Try
anothervolume setting.
4. Information ontape may have been
garbleddue to static electricity
discharge, magnetic field, ortape
deterioration. Try to load duplicate
copy,
if
available.
Computer
"hangs
up"
during
1.
Fluctuations in theAC power
normaloperation, requiring reset
supply. See AC PowerSources, below.
or
power-off/on
2. Defective
or
improperly installed
connector. Check all connection
cables to see that they are securely
attached and that they are not frayed or
broken.
3. Programming. Re-check the
program.
13/2
To Next Page
Loading...
