Operating
Your
Computer
as a
Floppy
Disk System
The
computer
operates
as a
hard
disk
system
only
because the
configuration
file
tells
it to
do
SO
To
operate
it
as
3
floppy
disk
system,
do
either rjl
the
lol lowing:
*
Remove
the Boot
diskette
from Floppy Drive and
insert
any other
operating
system
diskette
Reset
the
system.
(Only the Boot Diskette contains the hard disk configura-
tion
file.)
•
Leave the Boul Diskette in Fluppy Drive ©
but
tell ll le
com*
puter to ignore its configuration fits. To do this
press
CLEAR.' and hold it rinwn whilp resfltling 'hft systfim and
waiting
for TRSDOS
Ready to
appear. {If
you
are star-
ling up the computer hold down
clear
i
after
you enter
the date.) If you didn'l
do
this
correctly,,
try it
again.
Remember:
The Boot
Diskette
docs not contain a com-
plete operating system.
See the BOOT
and
SYSGEN library commands In the
Mode/ 4/4P Disk System
Owners
Manual
for
more
information,
To see that your system is now a floppy disk system,
type
(fit
TftSDOS Ready):
DEVICE
LIrdlER.
T
R
SDOS
d
iapl ays the physical devices
and the
ir
assigned
I
ogicol
Oevic*
numbers, Type:
DIR
:0
(ENTER:
TR5DOS
displays a directory ul the diskette
in Floppy
Drive
9-
Note: If your system
is
still responding as a hard disk system,
you
probably
did
not
press
_c_LEAfl
long
enough.
Try again.
21
To Next Page
Loading...
