What to do if Radio Shack is not responding to weather alert broadcasts?
If your Radio Shack Weather Radio isn't responding to NWS weather alert broadcasts, ensure that you have programmed the correct FIPS code(s) into the Weatheradio’s memory and make sure ALERT/PROGRAM is set to ALERT.
Why is there no weather broadcast when I press WEATHER on my Radio Shack Weather Radio?
If you're not getting a weather broadcast when you press WEATHER on your Radio Shack Weather Radio, make sure the telescoping antenna is fully extended. Also, ensure that the Weatheradio is set to the NOAA channel that is being broadcast in your area.
What to do if CHECK OP appears on Radio Shack ?
If 'CHECK OP' appears on your Radio Shack Weather Radio, it means the device hasn't received a SAME alert signal (including test or demo signals) for about one week. To resolve this: * Make sure the FIPS code(s) stored in memory are correct. * Make sure the telescoping antenna is fully extended.
Why does Radio Shack Weather Radio not receive WWVB?
Your Radio Shack Weather Radio might not receive WWVB due to a few reasons. In some areas, it might only receive WWVB during nighttime hours. Additionally, on very cloudy and stormy days, the radio signal might not be strong enough to set the clock. Ensure that the time antenna is mounted near a window.
General| Type | Weather Radio |
|---|---|
| Brand | Radio Shack |
| Power Source | Battery |
| Channels | 7 |
| Display | LCD |
| Battery Type | AA |
| Frequency Range | 162.400 MHz - 162.550 MHz |
To Next Page
