What to do if Radio Shack is not responding to weather alert broadcasts?
If your Radio Shack Weather Radio isn't responding to NWS weather alert broadcasts, ensure that you have programmed the correct FIPS code(s) into the Weatheradio’s memory and make sure ALERT/PROGRAM is set to ALERT.
Why is there no weather broadcast when I press WEATHER on my Radio Shack Weather Radio?
If you're not getting a weather broadcast when you press WEATHER on your Radio Shack Weather Radio, make sure the telescoping antenna is fully extended. Also, ensure that the Weatheradio is set to the NOAA channel that is being broadcast in your area.
What to do if CHECK OP appears on Radio Shack ?
If 'CHECK OP' appears on your Radio Shack Weather Radio, it means the device hasn't received a SAME alert signal (including test or demo signals) for about one week. To resolve this: * Make sure the FIPS code(s) stored in memory are correct. * Make sure the telescoping antenna is fully extended.
Why does Radio Shack Weather Radio not receive WWVB?
Your Radio Shack Weather Radio might not receive WWVB due to a few reasons. In some areas, it might only receive WWVB during nighttime hours. Additionally, on very cloudy and stormy days, the radio signal might not be strong enough to set the clock. Ensure that the time antenna is mounted near a window.
General| Type | Weather Radio |
|---|---|
| Brand | Radio Shack |
| Power Source | Battery |
| Channels | 7 |
| Display | LCD |
| Battery Type | AA |
| Frequency Range | 162.400 MHz - 162.550 MHz |
Statement on compliance with FCC Rules for radio interference.
Overview of the wireless weather station's capabilities and benefits.
Identifies components and mounting supplies.
Explains monitor windows, icons, and controls.
General advice for installing weather station components.
Step-by-step guide to calibrate the anemometer with the monitor.
Instructions for selecting a location and mounting the anemometer.
Procedures for selecting a location and mounting the rain gauge.
Guidelines for choosing a location and connecting the outdoor sensor.
Instructions for placing and mounting the indoor sensor.
Guidance on selecting a location and installing batteries for the monitor.
How to power the monitor using the AC adapter safely.
Procedures for configuring the monitor's time, date, and language settings.
How to toggle between different time and date display formats.
Setting up a daily alarm to sound at a specific time.
Understanding the weather forecast display and symbols.
Setting display units and viewing pressure history.
How to set and compare current sea level barometric pressure.
Setting an alarm for drops in barometric pressure.
Viewing indoor temperature and setting HI/LOW alarms.
Viewing dew point and setting alarms for it.
Viewing outdoor temperature and setting HI/LOW alarms.
Viewing dew point and wind chill, setting alarms.
Viewing and resetting max/min humidity records.
Setting alarms for high or low relative humidity.
Understanding rain gauge measurements and units.
Viewing daily and total rainfall records.
Setting an alarm for high rainfall rates.
Setting wind speed units and viewing wind data.
Viewing and resetting maximum wind speed records.
Setting an alarm for high wind speeds.
Troubleshooting lost sensor signals.
How to connect the weather station monitor to a computer.
How to cycle through sensor readings on the monitor.
Glossary of weather terms and cloud classification.
Procedure to reset the monitor to its default state.
Operating ranges and accuracy for temperature and humidity.
Ranges and accuracy for dew point, wind speed, and direction.
Measurement details for rainfall and barometric pressure.
Display, clock accuracy, power, dimensions, and weight.
To Next Page
