11
Note: Do not place the hook-and-loop tape over the
detector’s serial number or battery compartment
cover.
On a curved dashboard, cut the supplied strip in half
and use one strip on each side of the bottom of the
detector.
3. Remove the backing from the other side of the tape
and press the detector onto the dashboard.
Visor Mounting
The supplied sun visor clip lets you quickly mount the
detector on your vehicle’s sun visor.
Warning: Do not mount the detector on a visor if this
places the detector near the driver’s or a passenger’s
head.
Follow these steps to use the sun visor clip.
1. Remove the detector’s cover by pressing on the
cover and pushing outward. Store the cover in a
safe place.
22-1660.fm Page 11 Friday, August 6, 1999 9:38 AM
To Next Page
Loading...