12
2. Slightly open the visor clip, then slide it onto the top
of the detector until it snaps into place.
3. Clip the detector to the edge of the sun visor near-
est the windshield.
Windshield Mounting
The supplied suction-cup mount lets you mount the
detector on the windshield.
Caution:
Do not use the suction-cup mount in a vehicle
that has a plastic coating on the windshield designed to
protect passengers during an accident. If you use the
suction-cup mount on this type of windshield, you might
permanently mar the windshield’s surface.
1. Remove the detector’s cover by pressing on the
cover and pushing outward. Store the cover in a
safe place.
22-1660.fm Page 12 Friday, August 6, 1999 9:38 AM
To Next Page
Loading...