Radioddity CB-500 - CB-500 Emergency Channel Configuration

10
CB-500 CB Radio
(6)
Short press / keys on the unit or
UP
/
DN
keys on the microphone
to select the code type.
(7)
Short press key to confirm the code type. The code value flashes.
(unless
has been selected)
(8)
Short press / keys on the unit or
UP
/
DN
keys on the microphone
to select the code (form 01 (
) to 38 ( ) for CTCSS and 01 ( ) to 100
(
) to 104 ( ) for DCS).
(9)
Short press key to confirm the selected code.
Identical mode
(5)
Short press key make the type blink. ( or )
(6)
Short press / keys on the unit or
UP
/
DN
keys on the microphone
to select the RX or TX type.
(7)
Short press key to confirm the type. The code type flashes. ( ,
, or not set)
(8)
Short press / keys on the unit or
UP
/
DN
keys on the microphone
to select the code type.
(9)
Short press key to confirm the code type. The code value flashes.
(unless
has been selected)
(10)
Short press / keys on the unit or
UP
/
DN
keys on the microphone
to select the code (form 01 (
) to 38 ( ) for CTCSS and 01 ( ) to 100
(
) to 104 ( ) for DCS).
(11)
Short press key to confirm the selected code. The unit return to point
5, for set the second type.
(12)
If you don't need to set other parameters, press
PTT
switch or long press
key or wait for 10 seconds to store and exit MENU.
(1)
Long press key to enter the menu.
(2)
Short press / keys on the unit or
UP
/
DN
keys on the microphone
to select the or menu.
(3)
Short press key. The emergency channel blinks on LCD.
3.13
Emergency Channel Setting