RadioLink PRM-01 User Manual

深圳市乐迪电子有限公司
www.radiolink.com
How to Setup
Only need to setup in the radio menu.
Press Mode button to the BASIC MENU, choose PARAMETER, press Push button to
the PARAMETER menu, setup the EXT-ALARM voltage depends on your battery.
When paired with flight module PRM-01, model voltage is displayed on the main
menu of transmitter.
Attention
Note: Please power on all the equipment first, especially the plane. And then connect
the PRM-01 to the receiver to protect the PRM-01 in case the instantaneous current is
too much to burns the telemetry module.

RadioLink PRM-01 Specifications

General

Brand	RadioLink
Model	PRM-01
Category	Control Unit
Language	English