RADIOLINK ELETRONIC LIMITED
www.radiolink.com
2.2 With MINIPIX
WARNING: NO memory card inside.
2.2.1 Individually with MINIPIX
A 4 pin to 6 pin wire is needed: the 4 pin end to SUI04 and the 6 pin end to the GPS port of MINIPIX
2.2.2 Connecting with MINIPIX by I2C wiring board
1. Take a 6 pin to 6 pin wire with one end to the GPS port of MINIPIX and one end to the I2C
expansion board.
2. Take a 4 pin to 4 pin wire with one end to the I2C expansion board and one end to the I2C
wiring board.
3. Take another 4 pin to 4 pin wire with one end to the I2C wiring board and one end to the SUI04
To Next Page
Loading...