RADIOLINK ELETRONIC LIMITED
www.radiolink.com
4. Button Functions of SUIO4
Flight controller PIX can simultaneously support 6 modules (eg. SUI04) including
front/back/left/right/upward/downward. So the direction of each module should be set. Every press on the
button, the module direction changes once accordingly clockwise and the module LED flashes. Different flash
frequencies means different directions. Once-Front, Twice-Right, 3 Times-Back, 4 Times-Left, 5 Times-Downward,
6 Times- Upwards.
(Press this button to change the direction of obstacle avoidance, it will rotate 90 degree clockwise when press the
button once.)
NOTICE: Every direction changed, the flight controller and the module need to be restarted.
5.Data Check
As the data of the latest official MP is not well shown, it’s suggested to download the Mission Planner specially
for MINIPIX to check data.
http://www.radiolink.com.cn/firmware/MissionPlanner/MissionPlanner-1.3.49.6.exe
After the above setups are complete, the SUI04 data can be checked on MP. Disconnect the PIXHAWK and restart
the Mission Planner. When the MP is connecting, a new interface (as shown below) will come out automatically
and the working condition of SUI04 can be checked . If it doesn’t come out, please click the icon at the task bar
on the desktop.
To Next Page
Loading...