Need help?Do you have a question about the RADSON PTC BLOWER 950W and is the answer not in the manual?
Overview of device buttons and indicators for operation. It details the function of each button and the meaning of indicator lights.
Instructions for turning the device on, off, and putting it into standby mode. Covers power-on feature and standby feature.
Details the different operating modes (Auto, Comfort, Eco, Frost) and how to select them.
Explains how to activate boost, adjust duration, and understand stopping conditions.
Describes the operation of the fan after heating switches off for preservation.
Explains the color-coded gauge indicating boost duration levels and usage.
Instructions for adjusting the temperatures for Comfort and Eco modes.
Procedures for locking and unlocking the device's keypad for security.
Explains the self-learning process for automatic weekly programming based on occupancy.
Instructions to enter programming mode and set the current day and time.
How to set the current day and time for programming.
Overview of pre-set programmes and how to modify their schedules.
How to choose and allocate programmes to specific days of the week.
Programming options for devices with and without occupancy detectors.
How to view the currently selected programmes for each day.
How to temporarily change the setting temperature until the next scheduled change.
Details on how open window detection works and factors affecting it.
Explains the two ways to enable the open window detection feature.
Covers automatic and manual activation, and Frost Protection mode.
How occupancy detection optimizes heating and saves energy, and factors affecting it.
Warning against using load shedding during power failures due to potential device damage.
Procedures for pairing the remote control with the blower and cancelling the connection.
How to view the RF reception level to check transmission performance.
Step-by-step guide to access and navigate through user settings.
Options for adjusting display backlight and Frost Protection temperature.
How to set the maximum allowed duration for Boost mode.
How to set the maximum ambient temperature limit for Boost mode.
Step-by-step guide to reset the device to its original factory configuration.
Step-by-step guide to access and navigate through installer settings.
How to activate/deactivate Open Window and Occupancy detection.
Explains the PIN code protection and the settings it restricts access to.
Procedures for initializing and changing the PIN code.
How to enable or disable the PIN code protection.
Procedure to restore factory settings after PIN code management.
Final steps to confirm and execute the factory settings reset.
Step-by-step guide to access and navigate through expert settings.
How to calibrate the ambient temperature sensor for accurate readings.
How to adjust hysteresis and monitor internal temperature for safety.
Procedure to restore factory settings from expert settings.
Step-by-step instructions for cleaning the removable dust filter.
Details on voltage, frequency, power, and other technical attributes.
Declaration of product compliance and disposal information.
To Next Page
General