To Next PageTo Next Page
Need help?Do you have a question about the Rage Black Marlin BL and is the answer not in the manual?
Step-by-step guide for preparing the RC boat for operation before its first use.
Essential steps to follow after operating the RC boat to ensure proper care and storage.
Specifies the minimum age requirement for operating the sophisticated hobby product.
Overview of the components and controls of the RC transmitter, including switches and knobs.
Instructions on how to power the transmitter on and off using its dedicated switch.
Explanation of the LED indicator on the transmitter for monitoring battery status.
How to reverse the direction of the rudder and throttle servos for correct operation.
Explanation of the 5:5 switch for safe operation and throttle control.
Guide to adjusting the steering sensitivity using the rate knob for preferred control.
How to adjust the throttle trim for a neutral motor position when the trigger is released.
Adjusting the steering trim to ensure the boat tracks straight when the wheel is centered.
Process of binding the receiver to the transmitter to establish communication.
How to set the failsafe function to ensure the boat stops safely in case of signal loss.
Procedure for adjusting endpoint limits for steering and throttle for precise control.
Detailed steps for lubricating and replacing the drive shaft for drivetrain longevity.
General