Raidon iR2620-2S-S2 - User Manual

v.2.2 (Jun, 2011)
InTANK Series
iR2620-2S-S2 / SR2611-2S-S2R
User Manual
iR2620-2S-S2 SR2611-2S-S2R

Summary

Chapter 4 Hardware Installation Procedure

Chapter 5 Connecting iR2620; SR2611 to your computer

Chapter 6 Setting the Hard Drive Array Mode

RAID 0 Mode

Configuration details and benefits of using RAID 0 mode.

RAID 1 Mode

Configuration details and benefits of using RAID 1 mode.

Chapter 7 Computer Set Up

Chapter 9 Data Rebuilding Operation

During the Hard drive Failure

LCD Display Message During Hot Swap and Auto Rebuilding

Chapter 10 GUI Monitoring Software and Firmware Update

Firmware Upgrade

Step-by-step guide for updating the device's firmware.

Appendix: Trouble Shooting; Q&A

Unstable system after connecting iR2620; SR2611

Troubleshooting steps for system instability or device detection issues.

Hard Drive Failure

Explains capacity behavior and error messages related to HDD failures.

About Auto Rebuilding Function

Details the auto-rebuilding process behavior and potential issues.

Raidon iR2620-2S-S2 Specifications

General

Model	iR2620-2S-S2
Category	Storage
Type	RAID Enclosure
Drive Bays	2
Number of Drives Supported	2
Interface	SATA II
RAID Levels	RAID 0, 1, JBOD
Power Supply	External power adapter
Material	Aluminum
Max Capacity	Varies depending on installed drives
Cooling	Fan