Rain Bird 32SA User Manual

Simple
to
use:
Find your fixed LEFT edge.
Using the palm of your hand, turn
the center cap to the right until it
stops. Then turn it to the left until it
stops. This is your fixed left edge
.
Arc is preset to rotate 180º.
Adjusting the Pattern.
Using a screwdriver, adjust the
arc dial clockwise (+) to increase
the arc or counterclockwise (-)
to decrease the arc. Pattern is
adjustable from 40º
to 360º.
Do not turn past right or left
stop. Adjust wet or dry.
Adjusting the Radius.
Using a screwdriver, turn radius-
reduction screw to reduce radius
u
p to 35%. Adjust wet or dry.
32SA POP-UP
G
EAR DRIVEN ROTOR
“SA” for Simple Adjust
“SA” for Simple Adjust
Replaces
competive
product such as
Orbit
©
Saturn III
™
Pressure PSI 25 35
45 55
Radius ft. 29 31 31 32
Flow GPM 2.17 2.60 3.00 3.25
3.0 Pre-Installed Nozzle* P
erformance Chart
SPRA
YS 19 TO 32 FEET
ADJUST FROM 40-360º
READY FOR INST
ALLATION
SPRAYS 19 TO 32 FEET
ADJUST FROM 40-360º
READY FOR INSTALLATION
1/2” INLET
1/2” INLET
*Rain Curtain
™
Nozzle Technology
for even water distribution

Rain Bird 32SA Specifications

General

Brand	Rain Bird
Model	32SA
Category	Irrigation System
Arc Adjustment	40° to 360°
Spray Pattern	Adjustable
Inlet Size	1/2 inch
Type	Rotor
Pressure Range	25 to 55 psi (1, 7 to 3, 8 bar)

Summary

Simple to Use Guide

Setting the Fixed Left Edge

Find the fixed left edge by turning the center cap to its stops, establishing the rotation start point.

Adjusting the Spray Pattern

Modify the arc from 40° to 360° using a screwdriver to increase or decrease the spray pattern.

Adjusting the Spray Radius

Reduce the spray radius by up to 35% using the radius-reduction screw for efficient watering.

Nozzle Sets Included

Choosing a Nozzle

How To Change Nozzle