INSTRUCTION MANUAL | 4
Power Nozzle
™
Assembly and Operation
Assembly
1. Prior to using the Power Nozzle,
follow the Rainbow Quick Start
Guide to prepare the Rainbow.
2. Insert the bottom wand with male end
into the opening located on top of the
Power Nozzle. Press downward until
button lock clicks.
Operation
3. Plug in the Rainbow.
4. Press down on the main power button.
The Rainbow will always start in high
speed.
5. To disengage from the upright position,
use your left foot to press down on
the top of the Power Nozzle. Then pull
backwards.
6. To activate the Power Nozzle, squeeze
trigger on hose handle. Release trigger
to turn Power Nozzle off.
7. Guide Power Nozzle slowly back and
forth over carpet with free and easy
strokes. Let the Power Nozzle and
Rainbow do the work.
8. To lock Power Nozzle into the upright
position, grasp the wand assembly and
push forward until wand system is fully
engaged in locking tabs.
9. To disconnect the Power Nozzle from
the wand, place your foot on the foot
release above the pivot arm.
4
5
3
2
6
8
9
7