H32
1217
H203
N5
H32
1217
N5
H203
213
213
1. Lay Rail Uprights w/Handle Holes
(213)
(1217)
flat on the ground. Install 1/4" Hardware
(H32)
into
pre-drilled holes (as shown). A small hammer or mallet may be used if needed.
2. Flip Rail Uprights w/Handle Holes
(213) (1217)
and attach Safety Handles
(N5)
(as shown) using
1/4" Hardware
(H203)
and previously installed 1/4" Hardware
(H32)
.
27
Step 9
Safety Handle Installation
To Next Page
Loading...