3. Connect the hose correctly
3.1 Cut the hose according to the distance of the device,
the plant or you need
3.2 Put the head of hose into hot water for 10s or Put a
little veggie oil on the end of the hose before
connecting
3.3 Connect the hose to water inlet and outlet
veggie
oil
Inlet
Outlet
3.4 Connect the check valve to the water outlet near the pump. Using a
check valve may reduce water pressure. (The check valve must be
installed correctly in accordance with the ow direction)
1) If only the hose needs
to be
connected, you can use
6
container.
inlet with
5
07
To Next Page
Loading...
