EasyManua.ls Logo

RainPoint TWG004WRF - Page 19

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 19 -
Mist Mode (Spray by quantity)
3. Tap Mist Mode
4. Use the 24H time switch to toggle between 24hr and AM/PM time.
5. Click to select Mist on amount.
6. Tap Sta time to open the clock and set a sta time.
7. Tap Misting on amount to set the overall water volume of the misting program
(from 0 hour 0 minute to 11 hours to 59minutes).
8. Tap Mist time to set the duration for each misting.
9. Tap Inteal to to set the inteal time between each misting.
10. Select the days to repeat watering eve week as needed.
11. Save your settings.
For example:
The picture on the left shows the WiFi water timer will water for 59 seconds and then rest for 2 minutes in mist
mode cyclically. Until it runs out 555 gallons of water, staing at 7�30 in the morning eve Wednesday, Friday and Sunday.
Mist Mode (Spray on time)
3. Tap Mist Mode
4. Use the 24H time switch to toggle between 24hr and AM/PM time.
5. Click to select Mist on time.
6. Tap Sta time to open the clock and set a sta time.
7. Tap Misting Period(H:M) to set the overall duration of the misting program
(from 0 hour 0 minute to 11 hours to 59 minutes).
8. Tap Mist time to set the duration for each misting.
9. Tap Inteal to to set the inteal time between each misting.
10. Select the days to repeat watering eve week as needed.
11. Save your settings.
For example:
The picture on the left shows the WiFi water timer will water for 59 seconds and then rest for 2 minutes in mist mode
cyclically. The cycle lasts for 2 hours, staing at 7�30 in the morning eve Wednesday, Friday and Sunday.
EN
EN

Related product manuals