RAISE 3D Pro2 Series Replacing Manual

Manual Pro2 Series - Replacing
Thermocouple and Heating Rod-V1.0
1. Move the build plate to home position. Select 10mm as Move Steps, and drop the build
plate 250mm.
2. Set both extruders to unload temperature (recommend to set the target temperature to 5-
10C higher than its normal printing temperature). Unload the filament, and remove the
filament and filament guide tubes from the extruder.
3. At home page, set the nozzle temperature to be 0C and wait for the nozzles to reach
ambient temperature.
Version 1.0
Date：29/08/2018
1
www.raise3d.com

RAISE 3D Pro2 Series Specifications

General

Max Nozzle Temperature	300°C
Max Bed Temperature	110°C
Filament Diameter	1.75 mm
Frame Material	Aluminum
Heated Bed	Yes
Number of Extruders	2
Display	7-inch Touchscreen
Build Volume	305 x 305 x 300 mm
Nozzle Diameter	0.4 mm (default)
Print Speed	150 mm/s
Connectivity	USB, Ethernet, Wi-Fi
Supported Materials	PLA, ABS, PC, TPU, Nylon, Carbon Fiber
Operating System	Linux-based
Weight	52 kg
Power Requirements	110-240V, 50-60Hz