way to zero torque available when the hanger reaches 92°
Celsius. 92° celsius being the breakdown temperature of
urethane, which are what hanger bushings are made from.
Be aware a potential loss of regenerative brakes will also be
present when the rear hanger is within the temperature
protection range. When your rear hanger begins to enter
temperature protection range, which will be noticeable by a
distinct lack of torque available, slow to a stop and let your
hanger cool down before proceeding.
Normal operating temperature of your hanger will be
between 50° celsius and 60° celsius. But this may vary
based on your power usage and weight.
Only use red or yellow torque modes for short bursts of time,
to get up hills or for short bursts of acceleration.
Entering temperature protection mode will not damage your
board permanently. Rider experience will teach how much
sustained power will cause motor temperature protection.
15 Raith User Guide
To Next Page