23 Raith User Guide
Choose the setting that is required, then hold the mode
button for 2 seconds to exit the setting mode.
Skateboard Battery Volume Light Indication
4 lights - 75% - 100% Battery Volume
3 lights - 75% - 50% Battery Volume
2 lights - 50% - 20% Battery Volume
1 light - 20% - 10% Battery Volume
1 light blinking - lower than 10%
If all 4 battery indication lights go out it indicates a loss of
connection with the receiver.
Remote power indication
If the battery capacity of the remote is above 10% the
remote battery indication light will be green. If the battery
capacity of the remote is below 10% the remote battery
indication light will blink green and the remote will start to
vibrate. The remote will vibrate more frequently as the
remaining capacity further reduces.
When the remote is switched off and the remote is charging,
the remote power indication light is red. When the remote is
switched off and the remote is fully charged the red light will
go off.
When the remote is charging whilst switched on. If the
remotes battery capacity is less than 10% the remote power
indication light will switch between red and orange. If the
remotes capacity is above 10% the remote power indication
light will be orange. When the remote is fully charged the
remote power indication light will be green.
Exact indication of remote battery capacity
To check the exact capacity of the remote, quickly press the
power button twice. The four skateboard battery indicator
lights will momentarily show the capacity of the remote for 2
seconds before changing back to show the capacity of the
skateboard battery.
Skateboard battery indicates 4 lights on - remote battery
capacity 100% - 75%
Skateboard battery indicates 3 lights on - remote battery
capacity 75% - 50%
Skateboard battery indicates 2 lights on - remote battery
capacity 50% - 20%
Skateboard battery indicates 1 light on - remote battery
capacity 20% - 10%
Skateboard battery indicates 0 lights on - refer above
To Next Page