33 Raith User Guide
MAINTENANCE GUIDE
If you regularly clean and maintain your electric longboard, it
will last a long time and ride at its best:
• Always clean your bearings for best roll and quietest/
smoothest ride. Bearings get dirty and affect ride
quality which may reduce battery performance and
cause possible bearing failure.
• Always check all screws/nuts throughout the
skateboard are tight (truck nuts, wheel nuts etc). You
are responsible for this.
• The drive wheels will wear the fastest, only replace drive
wheels with wheels annotated for drive application as
they have been checked for tolerance. Drive wheels are
annotated on the inside face. A balance of the drive
wheels and motors may be required when changing
wheels, refer to the service section for more details on
how to carry this out.
• Always store your board at room temperature.
• Clean your board from dust and dirt so its looks and
rides as new at all times. Use a damp & dry cloth to
clean.
To Next Page