GAIN Adjustment Buttons (+/-)
Pushing the +/- buttons, located on the left side of the module, will increase/
decrease the brake control power output to the trailer brakes in 0.5 increments. The
GAIN setting can be increased to a maximum of 10 or decreased to a minimum of 0
(no trailer braking).
Refer to your Owner's Manual on
www.ramtrucks.com/en/owners/manuals
for further details.
WARNING!
Connecting a trailer that is not compatible with the ITBM system may result in
reduced or complete loss of trailer braking. There may be a increase in stopping
distance or trailer instability which could result in personal injury.
Adjustment Buttons
1 — Decrease (-)
2 — Increase (+)
UTILITY
221
To Next Page
