Automatic High Beams
The Automatic High Beams system provides increased forward lighting at night by
automating high beam control through the use of a digital camera mounted above the
inside rearview mirror. This camera detects vehicle specific light and automatically
switches from high beams to low beams until the approaching vehicle is out of view.
This feature is programmable through the Uconnect system. Refer to “Uconnect
Settings” in “Understanding Your Instrument Panel” in your Owner’s Manual on
www.ramtrucks.com/en/owners/manuals for further information.
Instrument Panel Dimmer
• Rotate the dimmer control to the extreme left position to fully dim the instrument
panel lights and prevent the interior lights from illuminating when a door is
opened.
• Rotate the dimmer control right to increase the brightness of the instrument panel
when the parking lights or headlights are on.
• Rotate the dimmer control right to the next detent position to fully brighten the
odometer and radio when the parking lights or headlights are on.
• Rotate the dimmer control right to the last detent position to turn on the interior
lighting.
NOTE:
If your vehicle is equipped with a touchscreen, the dimming is programmable through the
Uconnect system. Refer to “Uconnect Settings ” in “Understanding Your Instrument
Panel” in the Owner's Manual on
www.ramtrucks.com/en/owners/manuals for further
information.
Cargo Light With Bed Lights — If Equipped
The cargo light and bed lights (if equipped) are turned on by pushing on the cargo
lights button.
The cargo light and bed lights (if equipped) will also turn on for approximately
60 seconds when a key fob unlock button is pushed, as part of the Illuminated Entry
feature.
OPERATING YOUR VEHICLE
80
To Next Page
Loading...
