GEAR SELECTOR OVERRIDE — 6-SPEED TRANSMISSION
If a malfunction occurs and the gear selector cannot be moved out of the PARK
position, you can use one of the following procedures to temporarily move the gear
selector:
Column Shifter — If Equipped
1. Turn the engine off.
2. Firmly apply the parking brake.
3. Tilt the steering wheel to the full up position.
4. Press and maintain firm pressure on the brake pedal.
5. Insert a screwdriver or similar tool into the access port (ringed circle) on the
bottom of the steering column, and push and hold the override release lever up.
6. Move the gear selector to the
NEUTRAL position.
7. The vehicle may then be started
in NEUTRAL.
Shift Lock Manual Override Access Port
WHAT TO DO IN EMERGENCIES
285
To Next Page
Loading...
