Center Console Shifter — If Equipped
1. Turn the engine off.
2. Firmly apply the parking brake.
3. Using a small screwdriver or similar tool, remove the gear selector override access
cover (located to the right of the gear selector).
4. Press and maintain firm pressure on the brake pedal.
5. Insert the screwdriver or similar tool into the access hole, and push and hold the
override release lever down.
6. Move the gear selector to the
NEUTRAL position.
7. The vehicle may then be started
in NEUTRAL.
8. Reinstall the gear selector override
access cover.
Gear Selector Override Access Cover
WHAT TO DO IN EMERGENCIES
286
To Next Page
Loading...
