FLUID CAPACITIES — 6.7L CUMMINS DIESEL ENGINE
U.S. Metric
Fuel (Approximate)
2500/3500 Standard Cab Longbed Models 28 Gallons 106 Liters
2500/3500 Crew/Mega Cab Shortbed Models 31 Gallons 129 Liters
2500/3500 Crew Cab Longbed Models 32 Gallons 132 Liters
Standard Rear Tank – Chassis Cab Only 52 Gallons 197 Liters
Optional Midship Tank – Chassis Cab Only 22 Gallons 83 Liters
Diesel Exhaust Fluid Tank (Approximate) –
2500/3500 Models
5.5 Gallons 21 Liters
Diesel Exhaust Fluid Tank (Approximate) –
Chassis Cab
9 Gallons 34 Liters
Engine Oil With Filter
6.7L Turbo Diesel Engine 12 Quarts 11.4 Liters
Cooling System
6.7L Turbo Diesel Engine (Mopar Engine Coolant/
Antifreeze 10 Year/150,000 Mile Formula)
5.7 Gallons 21.4 Liters
FLUIDS, LUBRICANTS, AND GENUINE PARTS —
6.7L CUMMINS DIESEL ENGINE
Engine
Component Fluid, Lubricant, or Genuine Part
Engine Coolant
We recommend you use Mopar Antifreeze/Coolant 10 Year/
150,000 Mile Formula OAT (Organic Additive Technology).
Engine Oil
In ambient temperatures above 0°F (-18°C), we recommend you use
15W-40 engine oil such as Mopar, Shell Rotella and Shell Rimula
that meets FCA Materials Standard MS-10902 and the API
CJ-4 engine oil category is required. Products meeting Cummins
CES 20081 may also be used. The identification of these engine
oils is typically located on the back of the oil container.
In ambient temperatures below 0°F (-18°C), we recommend you use
5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell
Rimula that meets FCA Materials Standard MS-10902 and the API
CJ-4 engine oil category is required.
Engine
Oil Filter
We recommend you use Mopar Engine Oil Filters.
Fuel Filters
We recommend you use Mopar Fuel Filter. Must meet 3 micron
rating. Using a fuel filter that does not meet the manufacturers filtration
and water separating requirements can severely impact fuel system life
and reliability.
Crankcase
Ventilation
Filter
We recommend you use Mopar CCV Filter.
MAINTAINING YOUR VEHICLE
310
To Next Page
