320 IN CASE OF EMERGENCY
3. Insert the extension tube through the access hole
between the lower tailgate and the top of the fascia/
bumper and into the winch mechanism tube.
Winch Mechanism Tube
Inserting The Extension Tubes Into The Access Hole
4. Rotate the lug wrench handle counterclockwise until
the spare tire is on the ground with enough cable
slack to allow you to pull it out from under the vehicle.
Rotating The Lug Wrench Handle
5. Pull the spare tire out from under the vehicle to gain
access to the spare tire retainer.
Pulling The Spare Tire Out
6. Lift the spare tire with one hand to give clearance to
tilt the retainer at the end of the cable.
7. Pull the retainer through the center of the wheel.
Disengaging The Retainer
CAUTION!
The winch mechanism is designed for use with the jack
extension tube only. Use of an air wrench or other
power tools is not recommended and can damage the
winch.
23_DT_OM_EN_USC_t.book Page 320
To Next Page
Loading...
