GETTING TO KNOW YOUR VEHICLE 87
Position Two (Front And Rear Latches Latched)
TRI-FOLD TONNEAU COVER FOLDING
F
OR DRIVING OR REMOVAL
To remove the Tonneau Cover use the following steps:
1. Open the tailgate to access the rear pair of Tonneau
Cover latches located on the underside of the Cover.
Location Of Rear Latches
Slide Locking Lever Inward
2. Slide the locking lever toward the inside of the truck
bed to release the J Hook and pull the handle
downward into the released position.
Unlatching Latch
Released Position
1 — Panel 1
2 — Panel 2
3 — Panel 3
2
23_DT_OM_EN_USC_t.book Page 87
To Next Page
Loading...
